The detailed steps for using the air flotation machine

The detailed steps for using the air flotation machine are explained as follows:

1. Pre startup inspection: Before starting up, it is necessary to ensure that the equipment is clean, and that there is sufficient power and water supply. Confirm that the entire air flotation system is in a safe state, and check the working pressure and flow rate inside the dissolved gas tank.

2. Medication: Add an appropriate amount of coagulant to the dissolution tank as needed.

3. Start the equipment: Turn on the power switch and start the air flotation machine.

4. Control pressure: Adjust the pressure inside the dissolved gas tank as needed and keep it within 0.6MPa.

5. Release dissolved gas: The dissolved gas in the dissolved gas tank is released into the water through a release device, forming tiny bubbles.

6. Bubble adsorption: Impurities in water are adsorbed by bubbles, forming floating slag.

7. Scraping slag: Regularly scrape slag to separate the floating slag from the water.

8. Cleaning equipment: Regularly clean the pool and tank to prevent blockage.

9. Shutdown: Turn off the power switch and stop the operation of the air flotation machine.

10. Precautions: When using the air flotation machine, it is necessary to pay attention to the working pressure and flow rate inside the gas tank, keep the release device clean, and control the dosage of coagulant. At the same time, protective measures need to be taken when using strong acids and alkalis.

The above is a detailed explanation of the usage method of the air flotation machine, hoping to be helpful to you.